tools are run in existing industry standard Float Subs or Bit Subs
replaces or runs in tandem with the rigs existing Float Valve
The patented design allows to be the smallest tool in the industry weighing only 30 lbs and 40Ē long
tools are easily transported to and from the rig
Drillers can easily run and receive surveys at each connection
tools automatically produce a survey at each connection within 45 seconds from the time the pumps are turned on
has the fastest surveys in the industry
sends the borehole Inclination measurement as soon as the pumps stabilize. The surface decoder decodes inclinations in less than 45 seconds from pumps on
The survey inclination is conveyed via the measured time between two controlled pressure drops.
The surface system decodes the PRES telemetry controlled pressure drops into an accurate Inclination.
surveys are decoded and displaced during the normal process of bringing the pumps up after each connection. Surveys are decoded as quickly as 45 seconds after pumps on.
Unlike other systems, that need interpretation of waveforms or counting pressure pulses, displays a clear accurate Inclination during each connection event. The driller does not need any additional involvement or extra time to obtain a survey during the connection process.
High LCM Tolerance
The tool uses a ruggedized Float Valve or ďFloValveĒ as the telemetry transmitter. The FloValve valve is fully open during drilling and easily allows the most challenging of lost circulation muds to pass through the tool without problem.
Accurate Inclination Sensor
The Inclination Sensor is the same patented sensor technology originally used in the WellTronics E-Drift wireline tool. This tilt sensing technology is optimized to be the most accurate at near vertical inclination, perfect for vertical drilling surveys.
0 - 20 degs
tools have interchangeable FloValves that are easily configured at the rig.
FloValves are ruggedized 4R, 5R and 6R Float Valves that are run in standard float subs or bit subs with standard Float Valve bore backs.
The videos demonstrate the ease with which the FloValves can be attached to the tool and run in any specified Float Sub.
Standard Float Subs and Bit Subs
Several Float Sub options are available to run tools. The collar size determines the correct FloValve for the job. Customers are invited to provide the Float Sub and reduce the daily rental rate. Manufacturing drawings can be downloaded from this page.